JD CUSTOM CUES - MADE WITH VARIOUS OTHER WOODS
Cues in this gallery are made with other woods such as Cocobolo, Holly, Pink Ivory, Purpleheart, Snakewood, Tulipwood, etc.
JD CUSTOM ASHWOOD CUES - MODEL 1
Smoke grey stained Ash forearm with 4 veneered Gabon Ebonys, inlaid with ivorine notched diamonds and accenting hi-lo dots.
Black bull leather wrap.
Smoke grey stained Ash butt with 4 floating Gabon ebony boxes with matching veneers and inlays as the points.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors.
Black phenolic and Ivorine band rings with alternative Ivorine and veneer 'Bushka' rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with JD's high end maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- To Be Updated
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 1
Cocobolo forearm with 6 Gabon Ebony points inlaid with alternating larger and smaller Ivorine spearhead inlays and points edged with 4 play veneers.
Black lizard wrap for the grip.
Butt sleeve same as forearm with points in reverse direction.
Black phenolic joint collar with Ebony joint protectors.
Black phenolic and Ivorine 'Diamond link' decorative rings at A, B, C, D, E and Black phenolic butt cap.
Cue was made with high end shaft, but can be made to order with traditional my own LD shafts or custom shaft if preferred.
Photo Credits:- Quique Escudero
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 2
Similar to Model 1, but with short Ivorine points recut into Gabon Ebony points edged with 4 ply veneers.
3 section black Lizard wrap grips with Silver and Black Phenolic 'Box Window' decorative rings at C, D, E, F.
Other decorative rings at A, B, G are Ivorine bands edged with black phenolic, nickel silver and black phenolic with Black phenolic butt cap.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 3
Cocobolo forearm with 3 ply veneered Amboyna burl points, inlayed with floating Ivorine spearhead inlays with 2 lower accenting dots.
Brown lizard wrap for the grip.
Butt sleeve same design as forearm with points/inlays in reverse direction.
Ivorine joint with 3/8x10 thread pin and Cocobolo Joint protectors (Not shown).
Black phenolic decorative rings with nickel silver vertical 'dash' inlays at A, B, C, D, E and Ivorine butt cap.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 4
Cocobolo forearm with 4 high 3 ply veneered Gabon Ebony points with floating Ivorine notched diamond inlays accented with hi/lo dots and 4 medium Ivorine points edged with 1 ply black veneer.
Black lizard wrap.
Cocobolo butt sleeve with 4 floating Ivorine notched diamond inlays accented with Ivorine dots above, below and between each diamond.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Orange acrylic pearlescent bands at A, B, C, D, E, with the bands at A, B, edged with black phenolic.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 5
Same as Model 4, but without the shorter Ivorine points in the forearm, black lizard wrap, butt sleeve has 4 Gabon Ebony boxes with matching inlays as the points and ivorine dots between have black veneer edging.
Black phenolic joint collar with 3/8x10 thread pin and Cocobolo joint protectors.
This cue was made with traditional solid maple shaft, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 6
Cocobolo forearm with 4 3 ply veneered Gabon Ebony points with floating Ivorine diamonds and 4 medium Ivorine points.
Brown lizard wrap for the grip.
Cocobolo butt sleeve with 4 recut Ivorine into Gabon Ebony, into Ivorine floating boxed with overlapping small Ivorine diamonds inlays at the top and bottom boarder of each box and single floating Ivorine Diamond inlaid between each box.
Ivorine joint with 3/8x 10 thread pin and Gabon Ebony joint protectors.
Black phenolic, Ivorine and veneer 'Bushka' rings at A, B, C, D, E and Ivorine butt cap.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 7
Cocobolo forearm with 8 hi/lo Ivorine points edged with 4 ply veneer and Abalone diamond inlays in the 4 high points....Ivorine spearhead inlays accent the top of all 8 points.
Black lizard wrap was used on this cue when finished, (Not shown).
Gabon Ebony butt sleeve with plain Cocobolo wood Diamonds with accenting Cocobolo spearhead inlays at the top and bottom of the diamonds....Long Ivorine boxes are inlaid into the sides of the cocobolo diamonds and are graced with matching long Abalone diamond inlay in the middle of each box.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic rings with Ivorine and Cocobolo 'Box Window' inlays at A, B, C, D, E and Ivorine butt cap.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 8
Cocobolo forearm with 4x 4 ply veneered Tamarind points cut between 4 Amboyna burl butterfly splices edged with 4 ply veneers.
Brown lizard wrap.
Butt sleeve same as forearm with points & butterfly splices in reverse direction.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic and Ivorine 'Bushka' rings at A, B, C, D, E and Ivorine butt cap.
This cue was made with traditional solid maple shafts, but an alternative version can be made to order with your own choice of shafts made with traditional solid maple, my own LD shafts or high end/custom wood shafts.
Photo credits: Double Dave
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 9
Cocobolo Forearm and Butt sleeve, with Ebony points and butterflies edged with 4 play flame veneers.
Silver Dove inlaid into each ebony point.
Burgundy lizard wrap for the grip.
Ivorine joint collar and butt cap, with silver, ebony and veneer railroad decorative rings at A, B, C, D, E.
Can be made with either Standard, LD or High End shafts upon individual request.
 |  |  |
|---|
JD CUSTOM COCOBOLO CUES - MODEL 10
Same as Model 2, but with sectioned wrapless Ebony grip section with same silver ringworks.
Can be made with either Standard, LD or High End shafts upon individual request.
Photo credits: Double Dave, Germany
 |  |  |
|---|
JD CUSTOM HOLLY CUES - MODEL 1
Holly forearm with 6 hi-lo points of Buckeye Burl and Gabon Ebony points with 3 ply veneers.
Black bull leather wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, (Not shown )black phenolic and genuine 18kt gold inlay rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with JD's high end maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM KINGWOOD CUES - MODEL 1
Kingwood Forearm with floating Ivorine gothic spearhead points partially overlapping matching Gabon Ebony spearhead points.
3 section figured maple grip with 2 Kingwood and 18kt gold decorative rings as section dividers.
Same materials and design as the forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin.
Black phenolic decorative rings with small Ivorine diamond inlays at A, B, C, F, G and Ivorine butt cap.
This cue was made in 2013 and is 1 of 3 versions of this cue that I have made, (Other 2 versions were made with Amboyna Burl grip, one of which had Amboyna burl grip section with Ivorine inlays).
Cue was made with traditional solid maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM PINK IVORY CUES - MODEL 1
Pink Ivory forearm 4 long veneered Gabon Ebony points inlaid with Ivorine notched diamonds and accenting hi/lo Ivorine dots and 4 short amboyna burl points with single black veneer and veneered Ivorine spearhead inlays on top of each point.
3 section Pink Ivory grip with Gabon Ebony bands inlaid with alternating Ivorine notched diamonds and spearhead inlays at each end of the grip.
Pink ivory butt sleeve with 4 veneered floating Gabon Ebony boxes with hi/lo Ivorine spearhead and dot inlays, and veneered Gabon Ebony diamonds recut and inlayed between the boxes with notched Ivorine diamond in the centre and accenting hi/lo Ivorine dots.
Black phenolic joint collar with 3/8x10 thread pin and Ebony joint protectors, (Not shown).
Ivorine band rings inlaid with black phenolic line & dots and trimmed with black phenolic at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM PURPLEHEART CUES - MODEL 1
Purpleheart forearm and butt sleeve.
Highly figured curly maple grip.
Ivorine joint with radial thread pin and Ebony joint protectors.
traditional black phenolic band rings at A, B, thing black phenolic band rings at C, D, Ivorine 'Hoppe' band ring at E with customer's name and short black phenolic butt cap.
Cue was made with traditional solid maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM SNAKEWOOD CUES - MODEL 1
Snakewood forearm and butt sleeve.
Black lizard wrap.
Ivorine joint collar with radial thread pin and Ebony joint protectors, (Not shown).
Black phenolic bands with Ivorine 'Railroad' rings inlaid with snakewood at A, B and Ivorine 'Hoppe' ring at E with short black phenolic butt cap.
Cue was made with customer's own mess shaft at their request, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM SNAKEWOOD CUES - MODEL 2
Snakewood forearm and butt sleeve.
Brown lizard wrap.
White turquoise joint collar with black G10 Radial thread pin and Ebony joint protectors, (Not shown).
Ivorine band rings inlaid with Abalone dots and trimmed with solid nickel silver and black phenolic at A, B, C, D, E and White turquoise butt cap.
Cue was made with traditional solid maple shafts, but is available to order with my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM SNAKEWOOD CUES - MODEL 3
Snakewood forearm with 4 veneered Gabon ebony points inlaid with Ivorine notched diamonds and accenting hi/lo dot inlays of 18karat gold.
Ringtail lizard wrap.
Snakewood butt sleeve with 4 floating veneered Gabon Ebony boxes with notched Ivorine diamonds and same 18karat gold dot inlays.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors (Not shown).
Black phenolic rings with Alternating Ivorine and red veneer 'Bushka' rings trimmed with nickel silver bands at A, B, C, D, E and Ivorine butt cap.
Cue was made with high end maple shafts, but is available to order with traditional or my own custom LD shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|---|---|
 |  |
JD CUSTOM STABILISED CUES - MODEL 1
Stabilised burl wood cue in Sapphire blue with 4 short, wide Turquoise points with ivorine spire veneers and 4 long Ivorine veneered points inlaid.
Wrapless Gabon Ebony grip section.
Butt sleeve same materials and design as forearm with points reversed.
Short ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Thin black phenolic band ring at A, B and Black phenolic & Ivorine rings with alternating inlays of Ivorine and Saphire blue Stabilised burl wood 'Bushka' rings at C, D, E and black phenolic butt cap with Ivorine 'Crown' at the base.
6" Saphire Blue stabilised burl wood with short radial thread pin.
Cue was made with high end maple shafts, (not shown) but is available to order with traditional or my own custom LD shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM TAMARIND CUES - MODEL 1
Plain Jane Segmented Tamarind wood forearm, 3 sectioned grip and butt sleeve.
Black phenolic joint collar with radial thread pin and Ebony joint protectors.
Black phenolic bands with maple veneer 'stitch' rings at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Pool-Position, Dortmund, Germany
 |  |  |
|---|
JD CUSTOM TAMARIND CUES - MODEL 2
Tamarind wood forearm and butt sleeve.
Cored 3 section Ivory snake juma grip.
Black phenolic joint with radial thread pin and Ebony joint protectors, (not shown).
Thin ivory snake juma band rings with black phenolic trim at A, B, C, D, E, F, G and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM TAMARIND CUES - MODEL 3
Tamarind wood forearm with 4 high Ebony points with notched Ivorine Diamond inlays and 4 low Ivorine points.
4 ply veneers on all points.
Macassar Ebony wrapless grip section.
Tamarind wood butt sleeve with same design as forearmwith points in reverse direction.
Ivorine joint collar with 3/8x10 thread pin and Amboyna joint protectors.
Ivorine decorative rings with Amboyna box inlays and black phenolic trim rings at A, B, C, D, E.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM TULIPWOOD CUES - MODEL 1
Tulipwood forearm with 8 high/low veneered ivory snake juma points with black phenolic curved diamond inlays in the high points.
Burnt Orange color lizard wrap.
Butt sleeve same design as forearm with points in reverse direction.
Ivorine joint collar with 3/8x10 thread pin and ebony joint protectors, (not shown).
Black phenolic rings with Ivorine trimmed with nickel silver rings at A, B, E, Black phenolic and Ivorine band rings with horizontal Ivorine diamond inlays at C, D and Ivorine butt cap.
Cue was made with traditional solid maple shaft, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Dan Leong
 |  |  |
|---|
JD CUSTOM ZEBRAWOOD CUES - MODEL 1
Zebrawood forearm and butt sleeve.
Cored 3 Segmented Amboyna Burl grip.
Zebrawood joint collar with quick lock/release pin and Amboyna burl joint protectors, (not shown).
Super fancy and intricate decorative rings of 18 karat gold with super thin black phenolic vertical windows, trimmed with thin black phenolic bands at A, B, C, D, E, F, G and Zebrawood butt sleeve.
Cue was made with high end maple shafts, but is available to order with traditional, my own custom LD shafts or High End maple shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|---|---|
 |