JD CUSTOM EBONY CUES 3
Various Ebony cues with points.
JD CUSTOM EBONY CUES - MODEL 101
Gabon Ebony forearm with 8 hi-lo bridged Amboyna burl points with ivorine notched diamonds inlaid into high points, singly ply veneer on all points and petal dot inlays on top of each point.
Black leather wrap.
Amboyna burl butt sleeve with 4 Gabon Ebony 'Hourglass' inlays and notched Ivorine diamonds between.
Ivorine joint with 3/8x10 thread pin, ebony joint protectors.
Photo Credits: Mike Datsko
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 102
Gabon Ebony forearm with 16 hi-lo Amboyna and Ivorine points.
Amboyna burl grip section.
Butt sleeve same design and materials as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin, ebony joint protectors, black phenolic and Ivorine 'Box window' rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 103
Gabon Ebony forearm with 8 recut Mother of Pearl into Amboyna Burl points, edged with 2 ply veneers.
4 section wrapless grip with Amboyna burl at each end section and Ivory Snake Juma in the 2 middle sections.
Amboyna burl joint with radial thread pin and Amboyna joint protectors, (Not shown).
Decorative Snake Juma band rings edged with Ivorine and Black Phenolic at A, B, H, Black phenolic rings inlaid with horizontal Ivorine diamonds and Ivorine trim rings at C, G, and fancy 18kt gold rings at D, E, F and Amboyna Burl butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 104
Gabon Ebony forearm with 4 blue veneered Gabon Ebony points with floating Ivorine Diamond inlays and 4 shorter Ivorine points with red veneer.
White & grey Ringtail lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Gabon Ebony joint protectors.
Black phenolic rings with alternating Red, Blue and Ivorine 'Box Windows' with thin Ivorine trim rings at A, B, C, D, E and Ivorine butt cap with black phenolic lower half and mini-points.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 105
Gabon Ebony forearm with 6 hi-lo Pink Ivory points with 2 ply veneers and 6 short wide points with 3 ply veneers.
Brown lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Gabon Ebony joint protectors.
Black phenolic rings with alternating Red veneer and Ivorine 'Bushka' rings into black phenolic bands at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Pool-Position, Germany
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 106
Gabon Ebony forearm with 8 hi-lo Veneered Gabon Ebony points with floating Ivorine Diamond inlay in each high point.
Black lizard tail wrap.
Butt sleeve same as forearm with points in reverse direction.
Black phenolic joint with 3/8x10 thread pin and Gabon Ebony joint protectors.
Black phenolic and Ivorine band rings at A, B, E...Black phenolic rings trimmed with Ivorine and inlaid with horizontal Ivorine diamonds at C, D, and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Double Dave, Germany
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 107
Same as Model 107, but with Amboyna Burl points and wrapless Amboyna Burl grip section.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Double Dave, Germany
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 108
Same as Model 106, but with Recut Ivorine into Snakewood points edged with Ivorine veneer and grip has white & Grey ringtail lizard wrap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 109
Same as Model 103, but with 3 section Amboyna Burl grip section divided by Nickel Silver and Ebony 'Bow Window' rings at C, D, E, F.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Double Dave, Germany
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 110
Gabon Ebony forearm with 10 long, thin veneered Amboyna Burl points.
Black lizard tail wrap.
Butt sleeve same as forearm, but with points in reverse direction.
Same decorative rings arrangement and locations as Models 106 & 107 and Black Phenolic butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Double Dave, Germany.
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 111
Gabon Ebony forearm with 6 long veneered Kingwood points inlaid with floating Ivorine Spearheads into Turquoise downard Chevrons to make a Diamond inlay.
Black lizard tail wrap.
Butt sleeve same as forearm, but with points/inlays in reverse direction.
Amboyna Burl joint with Radial thread pin and Amboyna joint protectors.
Black phenolic and nickel silver 'Box Window' rings at A, B, C, D, E and Amboyna burl butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 112
Gabon Ebony forearm with 4 high Gabon Ebony points with Ivorine veneer and 4 low Ivorine points.
Gabon Ebony grip section with matching points at each end in upright and reversed direction.
Butt sleeve same as forearm, but with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic and Ivorine 'Stitch' rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
 |  |  |
|---|---|---|
 |
JD CUSTOM EBONY CUES - MODEL 113
Same as Model 102, but with Gabon Ebony in the longer hi-lo points and Brown leather lizard wrap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Dan Pelky
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 114
Same as Model 109, but with black leather wraps in the grip sections.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Jiten Patel
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 115
Same as Ebony Model 95, but Cocobolo wood in the large points and 3 sectioned grip, blue turquoise in the short points and Black phenolic decorative rings with Ivorine trim and black phenolic, Ivorine and blue veneer stripe 'Bushka' inlays.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Dan Pelky
 |  |  |
|---|---|---|
 |  |  |
JD CUSTOM EBONY CUES - MODEL 116
(CUE TO THE LEFT)
Gabon ebony forearm with 8 Hi-low Ivorine points with 2 ply veneers.
Black leather wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, Plain black phenolic band rings at A, B and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 117
(CUE ON THE RIGHT)
Gabon Ebony forearm with 6floating hi-low floating Ivorine points with dot and spearhead spire tops and chevron cut base accented by horizontal Ivorine diamonds with black dot inlaid into the centre of each diamond.
Black leather wrap was used on this cue when finished.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Gabon Ebony joint protectors, (Not shown).
Black phenolic bands at A, B, E with 'Stich' rings, Super fancy Ivorine band rings inlaid with Malachite dots and edged with black phenolic trim, paired with genuine Silver inlay rings at C, D and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Joe Dadivas
| | |
|---|
JD CUSTOM EBONY CUES - MODEL 118
Same as Model 107, but recut Amboyna Burl into Ivorine points edged with 1 ply veneer, no diamond in the points and points and black lizard wrap.
Cue was made with JD's own LD Shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Troy Martinez
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 119
Gabon Ebony foreadm with 2 wide floating Pink Ivory Spearhead Diamond inlays.
Cored Pink Ivory grip section.
Gabon Ebony butt sleeve with 4 smaller matching Pink Ivory wide diamond inlays.
Pink Ivory joint with 3/8x10 thread pin and Ebony joint protectors.
Plain Ivorine bands edged with black phenolic at A, B, C, D, E and Pink Ivory butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 120
Gabon Ebony forearm with 4 fancy 'Plier' points with 4 short Amboyna burl points at the base and 4 mid length Amboyna burl with diamond cut tops between.
Black leather wrap.
Gabon Ebony butt sleeve with upward and downward short amboyna burl points with single play veneer and long, curved Ivorine band inlays between the points.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic rings with single nickel silver trim at A, B and plain bands at C, and Ivorine butt cap.
Cue was made with traditional maple shaft, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 121
Same design as Amboyna Model 4, but with Gabon Ebony forearm, red veneer on the points, black lizard wrap and decorative rings have red veneer line with alternation red and black dot inlays at A, B, C, D, E.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic rings with single nickel silver trim at A, B and plain bands at C, and Ivorine butt cap.
Cue was made with traditional maple shafts and extra matching joint collar rings at customer's request, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
 |  |  |
|---|---|---|
 |
JD CUSTOM EBONY CUES - MODEL 122
Same design as Amboyna Model 2, but with Gabon Ebony forearm & butt sleeve with veneered Amboyna Burl points in the forearm, grip section and butt sleeve.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 123
Gabon Ebony forearm 4 long narrow points of Gabon ebony with floating notched Ivorine Diamonds with accenting hi-lo dots and 4 shorter Amboyna burl points, all points edged with 4 play 'Fire' veneers.
Black leather wrap.
Gabon ebony butt sleeve with 4 4x ply veneered floating boxes with same notched Ivorine Diamond and hi-low dot inlays and larger full Ivorine diamond inlays between the veneered boxes.
Black phenolic joint collar with 3/8x10 thread pin and Ebony joint protectors.
Ivorine and veneer 'Stitch' rings with Ivorine and black phenolic trim rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 123
Gabon Ebony forearm with 6 hi-low Amboyna Burl points with floating Ivorine Diamonds inlaid into the longer points and all points edged with 3 ply veneers.
Black lizard wrap.
Gabon ebony butt sleeve with 4 veneered floating Amboyna Burl boxes with Ivorine diamonds inside and between the veneered boxes.
Black phenolic joint collar with 3/8x10 thread pin and Ebony joint protectors.
Ivorine and black phenolic band rings at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Jason Hecock
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 124
Gabon Ebony forearm with 6 hi-low Tulipwood points.
Brown lizard wrap.
Tulipwood butt sleeve with Gabon Ebony lower band.
Black phenolic joint collar with 3/8x10 thread pin and Ebony joint protectors.
Ivorine and black phenolic band rings at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM EBONY CUES - MODEL 125
Gabon Ebony forearm with 6 hi-low Amboyna burl points.
Black lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Amboyna Burl joint with 3/8x10 thread pin and Amboyna burl joint protectors.
Amboyna Burl band rings edged with veneers at A, B, C, D, E and Amboyna Burl butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 126
Gabon Ebony forearm with 8 hi-low veneered Tamarind wood points with full turquoise diamond inlay in each high point.
Black lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Ivorine 'Box Window' rings with Ebony inlays and black phenolic trim at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional maple shafts, (Not shown) but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Dan Pelky
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 127
Gabon Ebony forearm with 8 hi-low veneered Gabon Ebony points with full turquoise spearhead inlay in each high point with Ivorine accent inlays on each side of spearhead points.
Ringtaillizard wrap.
Gabon Ebony butt sleeve with4 pairs of mirrored Hi-low turquoise spearhead inlays with matching Ivorine accent inlays and Ivorine dots above, between and below,... and 4 groups of 4 full Ivorine diamonds between with accenting Ivorine dot inlays above and below each set of diamonds.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Ivorine 'Diamond Link' rings inlaid into black phenolic band rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 128
Gabon Ebony forearm with 8 hi-low veneered Gabon Ebony points with full Malachite spearhead inlay in each high point.
Black lizard wrap.
Gabon Ebony butt sleeve with4 pairs of mirrored Hi-low Malachite spearhead inlays with matching Ivorine accent inlays and Ivorine dots above, between and below,... and 4 groups of 4 full Ivorine diamonds between with accenting Ivorine dot inlays above and below each set of diamonds.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Ivorine 'Diamond Link' rings inlaid into black phenolic band rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional maple shafts, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 129
This is one of the fanciest and most intricate cues ever to come from my workshop.
JD
Gabon Ebony forearm with 8 hi-low loaded with Malachite and turquoise inlays, points with red veneer and malachite butterfly accents between each high point.
Gabon Ebony grip section with same materials and pattern inlaid at each end with points aimed to the centre.
Butt sleeve same as forearm with all points in reverse direction.
Malachite joint with 3/8x10 thread pin and Ebony joint protectors.
Turquoise band rings trimmed with nickel silver and black phenolic at A, B, C, D, E, F and Malachite butt cap.
6" matching Gabon Ebony extension with Malachite butt cap and extra 10" plain Gabon Ebony extension.
Cue was made with JD's high end shafts with Carbon Fibre core, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Jiten Patel
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 130
Same as Model 122, but 3 section grip with Black Lizard wraps.
Cue was made with JD's high end shafts with Carbon Fibre core, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM EBONY CUES - MODEL 131
Full Splice Gabon Ebony butt with 6 hi-lo veneered points ineo Gabon Ebony forearm.
Black leather wrap.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic bands with veneered 'Railroad' rings at A, B and single ply veneer ring at E with Ivorine butt cap.
Cue was made with JD's high end shafts with Carbon Fibre core, but a custom version of this model can be made to customer request with either traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits: Dan Pelky
 |  |  |
|---|