JD CUSTOM MAPLE CUES GALLERY.
Various cues with maple featured in the butt of the cue.
JD CUSTOM MAPLE CUES - MODEL 1
Plain jane birdseye maple forearm, Gabon Ebony grip section and Birdseye Maple butt sleeve.
Ivorine joint collar with modified 3/8x10 thread pin, maple joint protectors, (Not shown in photos) decorative band rings of Ivorine edged with nickel silver and black phenolic at A, B, C, D, E, and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits:- Dandan Antonio
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 2
Birdseye maple forearm with 4 Tulipwood points with long tulipwood grip section and short Birdseye Maple butt sleeve.
Black phenolic joint collar with 3/8x10 thread pin, Maple joint protectors, (Not shown in photos) black phenolic, Ivorine and Tulipwood band rings at A, B, E and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo Credits: Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES MODEL 3
Curly maple forearm with 4 Gabon ebony points edged with 2 ply veneers
Solid black linen wrap
Plain Gabon ebony butt sleeve with black phenolic butt cap.
Black phenolic joint collar with radial thread pin, plain black phenolic rings at A, B and ebony joint protectors.
Photo Credits:- Derek "The Destroyer" Schwager.
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 4
Curly maple forearm with 6 hi-lo cocobolo points edged with single ply black veneer.
Curly maple grip section.
Cocobolo butt sleeve
Ivorine joint collar with 3/8x10 thread pin, custom cocobolo decorative rings inlaid with maple boxes at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 5
'The Rosary' version 1 made with Maple forearm and light blue stained amboyna points edged with 2 ply veneers.
Black leather wrap was installed on this cue (Not shown in photos).
Maple butt sleeve with black phenolic Cross with accenting hexagonal loop of dot inlays and adjoining single ply black veneers.
Ivorine joint collar with 3/8x10 thread pin, thin black phenolic trim rings at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 6
Traditional style cue with maple forearm and 4 Ebony points edges with Ivorine notched Diamond and dot inlays and 3 ply veneers.
Black Lizard wrap
Ebony butt sleeve with same Ivorine notched diamonds and dot inlays.
Ivorine joint collar with 3/8x10 thread pin, ebony joint protectors, black phenolic and maple 'stitch' decorative rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 7
Same materials and design as Model 6 above, but with the butt sleeve featuring 3 ply veneer boxes and floating notched diamonds with accenting dot inlays at each end.
Decorative 'Stich' rings on this model features Ivorine trim rings at each side at customer's request.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 8.1
Same design as Model 7, but with Maple butt sleeve and Gabon Ebony boxes edged with 3 ply veneer, inlaid with Ivorine notched diamonds and dots.
Decorative rings of Black phenolic, with double nickel silver trim rings on each side of the central Ivorine band ring that is inlaid with abalone 'Dots', made to customer's request at A, B, D, E.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 8.2
Same design/materials as Model 8.1, but extra decorative rings at C, (between the top of the grip and base of the points).
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|---|---|
 |  |
JD CUSTOM MAPLE CUES - MODEL 9
Maple forearm and butt sleeve with 4 ebony points edged with 4 ply veneers.
Brown lizard wrap.
Ebony butt sleeve with 6 floating ivorine boxes.
Ivorine joint collar with 3/8x10 thread pin,ebony joint protectors, (not shown in photos) Black phenolic and Ivorine 'Bushka' decorative rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 10
Similar to Model 10, but with Birdseye maple forearm and ebony points with 3 ply veneers.
Sectioned Gabon ebony grip.
Gabony ebony butt sleeve with 6x floating Birdseye Maple boxes.
Ivorine joint collar with 3/8x10 thread pin, ebony joint protectors, "Broad Bushka" rings of black phenolic, Ivorine and maple boxes at A, B... thin black phenolic trim ring at C and thin red veneer band trim rings at D, E, F, G.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |  |
JD CUSTOM MAPLE CUES - MODEL 11
Maple forearm with 4 ebony points edged with 4 ply veneers.
Black leather wrap.
Ebony butt sleeve with 4 recut ebony into maple boxes, each with floating Ivorine notched diamond inlay and edged with 2 ply veneers.
Ivorine joint collar with 3/8x10 thread pin, ebony joint protectors, decorative rings of black phenolic, red veneers and Ivorine boxes at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |  |
JD CUSTOM MAPLE CUES - MODEL 12
Maple forearm with 4 Gabon Ebony points inlays with mother of pearl notched diamonds and edged with 3 ply veneers.
Black with red speck linen wrap.
Gabon Ebony butt sleeve with floating 'Barbells' of single ply and 3 ply red veneers with notched mother of pearl diamonds at each end.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 13
Maple forearm with 4 Snakewood points inlayed with Notched mother of pearl diamonds, accented by 1 pearl dot inlay above and 3 dot inlays below the diamonds and points edged with 4 ply veneers.
Dark brown lizard wrap.
Snakewood butt sleeve with 4 groups of 4 notched mother of pearl diamond inlays to make a larger diamond accented by small pearl dot inlays above/below each group... singly ply veneer barbells inlaid between the larger diamonds with veneered pearl dot inlays at each end.
Ivorine joint collar with 3/8x10 thread pin, Gabon ebony joint protectors, Black phenolic and Ivorine 'stitch' rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 14
Stained Maple forearm with 4 narrow ebony points, inlaid with Ivorine 'Propellers' and edged with 4 ply veneers.
Cocobolo grip section.
Cocobolo butt sleeve with 4 floating boxes edged with 3 ply veneer and featuring Ivorine 'Propeller' inlays in each box.
Ivorine joint collar with 3/8x10 thread pin, ebony joint protectors, black phenolic and Ivorine 'Bushka' rings at A, B and single 'Bushka' ring at E with Brown canvas phenolic butt cap trimmed with thin Ivorine 'Hoppe' ring at the end.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|---|---|
 |  |
JD CUSTOM MAPLE CUES - MODEL 15
Maple forearm with 4 cocobolo points, inlayed with curved Ivorine diamonds with small Ivorine dot inlays at each end, and edged with 3 ply veneers.
Black lizard wrap.
Cocobolo butt sleeve with 4 floating Ebony boxes edged with 3 ply veneers and same Ivorine diamond and dot inlays as featured on the points.... smaller diamond inlays between the veneered boxed with single dot inlay between.
Black phenolic joint collar with 3/8x10 thread pin, Ebony joint protectors, (Not shown) decorative 'band' rings of Cocobolo and maple trim rings at A, B, C, D, E, and Black Phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Double Dave.
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 16
Maple forearm Gabon Ebony points with floating inner silver veneer with Dots at the top and base of the point and silver diamond inlat in the center.
Black leather wrap was installed on this cue after photos were taken.
Gabon Ebony butt sleeve with single ply green veneered full barbells with small silver dot inlays and 3 ply half barbells with larger silver dot inlays.
Black phenolic joint collar with radial thread pin, ebony joint protectors, (Not shown) decorative black and maple 'Stitch' rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODELS 17, 18 & 19
Model 16:
Maple forearm with 4 ebony points in 4 play veneer, black leather wrap and Ebony butt sleeve with 4 small Pink ivory boxes edged with 3 ply veneers.
Black phenolic joint collar with 3/8x10 thread, ebony joint protectors, black phenolic and maple 'stitch' rings at A, B, E and Ivorine butt cap.
Model 17:
As Model 16, but with ivorine notched diamond in the points, classic single veneer 'portrait' ebony boxes with Ivorine notched diamonds.
Ivorine joint collar with 3/8x10 thread pin, ebony joint protectors, black phenolic and maple 'Windows' rings at A, B and Black Phenolic and Maple 'Chain Link' ring trimmed with maple at E, with Ivorine butt cap.
Model 18: Same as Model 16, but with Ivorine joint collar, 'stich' rings at A, B, veneered Maple boxes in the butt sleeve and red veneer trim ring a E.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |  |
JD CUSTOM MAPLE CUES - MODELS 20A & 20B
Pair of Maple & Ebony 'Tad Kohara' tribute cues.
Plan Maple forearm (Model 19) or Birdseye Maple Forearm (Model 20) with 4 ebony points inlays with Ivorine diamonds and edged with 4 ply veneers.
White and black speck Irish linen wrap.
Maple butt sleeve with 4 Ebony boxes inlays with Ivorine diamonds and edged with 3 ply veneers.
Stainless Steel joint with 3/8x10 thread pin, ebony joint protectors, Black phenolic and maple 'window' rings at A, B and custom 'Kohara' box link chain rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODELS 21 & 22
Maple forearms with 4 Ebony points inlaid with mother of pearl notched diamonds and accenting pearl dots, edged with 4 ply veneers.
Black leather wraps
Gabon Ebony butt sleeve with 8 mother of pearl dot inlays and 4 pearl notched diamonds on Gabon Ebony trimmed with Blue pearlescent acrylic, (Model 21) or Orange pearlescent acrylic edge with Gabon Ebony, (Model 22).
Ivorine joint collar with 3/8x10 thread pin, Gabon ebony joint protectors, black phenolic with single nickel silver trim rings at A, B and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 23
Maple forearm with 4 veneered Rosewood points.
Black with white speck Irish linen wrap.
Rosewood butt sleeve with black veneered Ivorine boxes and Jamaican flag inlays made with Ebony, Green and Yellow veneers.
Stainless Steel joint with 3/8x10 thread pin, maple joint protectors.
Brown canvas phenolic decorative rings trimmed with Yellow & Green veneer rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 24
(EBONY POINTS)
Maple forearm with 4 Ebony points inlaid with Silver star diamonds and edged with 4 ply veneers.
Black/White snake skin wrap.
Gabon Ebony butt sleeve with alternating rows of Silver star diamond and Silver full diamond inlays.
Black phenolic joint collar with radial thread pin, Ebony joint protectors, Ivorine 'Hoppe' ring edged with nickel silver rings at E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 25
(EBONY POINTS)
"The Rorsary 2" (Updated version of Model 5 at request of same private customer).
Maple forearm with 4 Ebony points inlayed with Ivorine 'Crosses', edged with 4 ply blue and black veneers.
Black lizard wrap.
Gabon Ebony butt sleeve with Silver dots and veneers linked like downward points, connecting to 4 Silver 'Gothic Cross' inlays.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, black phenolic trim rings at A, B, Ivorine 'Hoppe' ring at E with black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 26
Maple forearm with 6 long ebony points edged with 3 ply veneers.
Black lizard wrap.
Gabon ebony butt sleeve with wide Maple "Southwest" band ring.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, Railroad decorative rings at A, B, C, E, sing ply veneer rings at D and Black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 27
Same as Model 26, but with Ivorine points, maple joint protectors and matching 'Railroad' decorative rings at A, B, C, D, E.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 28
Maple forearm 4 high cocobolo points inlaid with Ivorine diamonds and 4 low Ebony points, all edged with 4 ply veneers.
Brown lizard wrap.
Cocobolo Butt sleeve with 4 long recut Ivorine into Ebony rectangle boxes, edged with Ivorine veneer with Ivorine diamonds inlaid into each end of the boxes and larger Ivorine diamonds between each box.
Ivorine joint with 3/8x10 thread with Ebony joint protectors, Black phenolic rings with 'Diamond Link' inlays at A, B, and Cocobolo bands with Ivorine 'Diamond Link' rings at C, D, E and Cocobolo Butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 29
Same as Model 28, but with Purpleheart for Long points, Butt Sleeve & Butt Cap and Black Phenolic, Ivorine and Purepleheart 'Railroad' rings at A, B, C, D, E.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 30
As with Model 28, but with high Ebony points and low Ivorine points and all matching decorative rings of black phenolic with Ivorine 'Diamond Link' style rings at A, B, C, D, E.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Double Dave
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 31
Maple forearm with 8 hi/lo Ebony points with Ivorine diamond inlays, but no veneers.
Black leather wrap.
Cocobolo butt sleeve with alternating Ivorine and hollow Ivorine veneered cocobolo diamonds.
Black phenolic joint with 3/8x10 thread pin, ebony joint protectors, black phenolic and Ivorine band rings at A, B and single Ivorine band rings at D, E. and ivorine butt cap with cocobolo crown at the base.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|---|---|
 |  |  |
 |
JD CUSTOM MAPLE CUES - MODELS 32 & 33
Maple forearm with 4 high Amboyna burl points with Ivorine diamonds (33 full/34 Notched) and accenting hi/lo dots and 4 low ebony points, all edged with 3 ply veneers.
Amboyna burl grip (33) and Gabon Ebony grip (34).
Gabon Ebony butt sleeves with 4 veneered Amboyna burl boxes with 3 ply veneer and Ivorine diamonds inside and between the boxes.
Ivorine joint with 3/8x10 thread pins, Ebony joint protectors, black phenolic and Ivorine decorative 'Stitch' rings at A, B, C, D, E and Ivorin Butt caps.
Cues were made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 34
Smoke stained Maple forearm with 8 hi-lo Macassar Ebony points with notched Ivorine diamonds inlays accented by hi-lo dots into the high points and 4 ply veneer on all 8 points.
Mid brown lizard wrap
Macassar Ebony butt sleeve with 3 rings of alternating Ivorine notched diamonds and dot inlays.
Black phenolic joint with 3/8x10 thread pin, ebony joint protectors, black phenolic and Ivorine decorative 'Stitch' rings at A, B, C, D, E and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:-
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 35
Maple forearm with 8 Gabon ebony hi-lo points with notched diamonds in each high point and black phenolic & pearl petal inlays on top of each point.
Black lizard wrap with Ivorine 'Hoppe' ring at the bottom of the grip.
Gabon ebony butt sleeve with 4 pearl notched diamond inlays.
Ivorine joint with 3/8x10 thread pin, maple joint protectors and black phenolic and maple 'stitch' rings at A, B, C, D, E, F, G, H with rows of alternating mother of pearl square boxes and dots at between C & D, E & F, G & H and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 36
Tad Kohara tribute 2.
Maple forearm with 16 Ivorine into Ebony recut points withblack notch diamond inlays in the long ivoring points, petal inlays on the top of the Ebony points and Ivorine veneered dot inlays on top of the Ivorine points.
White & black speck Irish linen wrap.
Gabon ebony butt sleeve with 2 ply veneered Ivorine points adjoined with black dot inlays veneered with Ivorine and 4 Ivorine oval with black notched diamonds and Ivorine 'Cameo' style outer edging.
Ivorine joint with 3/8x10 thread pin with Ebony joint protectors, black phenolic and maple 'stitch' rings at A, B and black phenolic & Ivorine 'Bullseye Box link' decorative rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 37
Maple forearm with 8 hi-lo Ivorine points with malachite diamonds inlaid in each high point and Ivorine spearhead inlays on top of each low point, all points edged with 4 ply veneers.
Black lizard wrap.
Gabon ebony butt sleeve with 4 large Ivorine curved diamonds accented with hi-lo spearhead points, 4 long Ivorine boxes, inlays with long Malachite diamonds and edged with 2 ply veneers overlapping the sides of the large Ivorine diamonds.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, black phenolic and Ivorine band rings at A, B and black phenolic and Ivorine 'box window' rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Pool-Position, Dortmund.
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 38
Tad Kohara Tribute 3.
Maple forearm with 8 hi-lo bridged Ebony points with black and peal petals on top of each point, lined internally with single ply Ivorine to make smaller, thinner secondary points with Ivorine dots on top of each point... Ivorine notched diamond inlaid in the base of each large Ebony point.
Solid black Irish linen wrap.
Gabon ebony butt sleeve with Ivorine notched diamond inlays outline by multiple Ivorine veneers of ovals, rounded corner rectangles and long rectangles boxes accented by red diamond inlays accented by meticulously inlaid veneer feathers Yellow and Blue onto short Ivorine veneers, edged with long Yellow veneers on each side of the feathers.
Stainless steel joint with radial thread pin, Ebony joint protectors, black phenolic collars with maple stitch inlays at A, B and Black Phenolic rings with Ivorine chain links edged with Ivorine trim rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 39
Curly Maple forearm with 3 Long Cocobolo points and 3 short Snakewood points, all edged with 2 ply veneers.
Cocobolo grip section.
Same design and materials with points reversed direction.
Black phenolic joint collar with radial thread pin, maple joint protectors, black phenolic collars with silver trim ring at A, B, E and Black phenolic with silver 'Railroad Window' rings at C, D, and black phenolic butt cap.
Cue was made with customer's own choice of shaft, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 40
highly figured Birdseye Maple forearm with 4 long recut Ivorine into Ebony points, overlapping Ivorine band ring.
Brown lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin, Ebony joint protectors, (Not shown) black phenolic decorative rings with silver trim rings and Ivorine dot inlays at A, B, C, D, E, F, G and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 41
Maple forearm with 4 bridged high Amboyna points, 4 low Amboyna points, all edged with 3 ply veneers.
Brown lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin, ebony joint protectors, black canvas phenolic collars with maple window inlays at A, B, Black phenolic, red veneer and Ivorine 'Bushka' rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 42
Same design as Model 41, but large points being Snakewood and short points being Ivorine and tan brown lizard wrap.
Decorative 'Swatch' rings at A, B, C, D, E made with box window inlays of Maple, Snakewood and Ivorine, trimmed with Black phenolic and Ivorine rings that are divided by extra thin silver trim rings.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 43
Same as Model 42 with maple joint protectors and darker brown leather wrap.
Cue was made with traditional solid maple shaft, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 44
Same as Model 42, but with short points made of Turquoise.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Pool-Position, Dortmund
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 45
Same as Model 44, but with 3 Sectioned Ringtail Lizard wrap and extra unique decorative rings of quadruple super thin Turquoise bands separated by thin silver trim rings and edged with black phenolic at A, B, C, D, E, F, G, Matching Ivorine and Turquoise capped joint protectors (Not shown).
Cue was made with JD's custom high end maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODELS 46 & 47
Maple forearms with 4 bridged, Long Ebony points with Ivorine 'Spear' inlays and 4 short Ebony points, all with 4 ply veneers and petal dots or Ivorine spears on top of each point.
Black leather wraps (installed after photos were taken).
Same design/materials in butt sleeves with points reversed direction.
Ivorine joint with 3/8x10 thread pin on both cues, maple joint protectors and Maple * Ebony 'Railroad' decorative rings at A, B, C, D, E and Ivorine butt caps.
Cues weremade with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 48
Maple forearms with 4 high Gabon Ebony points inlaid with extended Ivorine spearheads and edged with 4 ply veneers and 4 low Ivorine points edged with 1 ply black veneer and Ivorine spearhead inlays on top of each point.
Black lizard wrap.
Same design/materials in butt sleeve with points reversed direction.
Ivorine joint with 3/8x10 thread pin on both cues, maple joint protectors.
Ivorine and black phenolic 'Box Window' decorative rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 49
Maple forearm with 8 hi-lo points, all with Ivorine diamond inlays at the base each of higher point.
Maple and Gabon Ebony grip section with same design as forearm, but with points and inlays at both ends of the grip.
Same design/materials in butt sleeve with points reversed direction.
Ivorine joint with 3/8x10 thread pin on both cues, maple joint protectors.
Black phenolic and Ivorine 'Box Window' decorative rings at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 50
Maple forearm with 4 Gabon Ebony points inlaid with notched Ivorine diamond and accenting floating dots above/below and edged with 4 ply veneer.
Black lizard wrap.
Gabon Ebony butt sleeve with4 large recut notched Ivorine into veneered Ebony diamonds, with 2 Hi-lo accenting dot inlays inside each end of the ebony diamonds and 2 rows small ivorine notched diamonds accented with 3 floating hi-low dots at top and bottom of the butt sleeve.
Ivorine joint with 3/8x10 thread pin on both cues, ebony joint protectors, (not shown).
Decorative rings of Ivorine bands inlaid with Abalone dots and edged with Black Phenolic and double nickel silver on each side at A, B, C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 51
Same as Model 34 above, but with cocobolo for the points and butt sleeve, instead of Gabon Ebony.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Pool-Position, Dortmund
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 52
Same as Model 45 above, but with Malachite points and decorative rings, instead of Turquoise.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with traditional solid maple, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 53
Same as Model 42 above, but with bridged Snakewood long points and shorter Abalone shellpoints.
Cue was made with traditional solid maple shafts for former player rep, Kaylash Persad, Netherlands, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Kaylash Persad
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 54
Curly maple forearm with 4 veneered Gabon Ebony points with Ivorine Fleur De Lys inlay in each point.
Black lizard wrap.
Gabon Ebony butt sleeve with 4 ply veneer narrow boxes with matching Fleur De Lys inlays in each box.
Black phenolic joint collar with 3/8x10 thread pin and Ebony joint protectors, (Not shown)
Black phenolic bands with double nickel silver trim rings at A, B, C, D, E and black phenolic butt cap.
6" Maple extension with black phenolic joint collar with 4 ply veneer band rings at F, G and black phenolic butt cap.
Cue was made with traditional solid maple shafts, (Not shown) but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 55
Honey stained Tiger Maple forearm with 8 hi-lo black veneered Amboyna Burl points.
Black lizard wrap was used for this cue, (Not shown).
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Amboyna joint protectors, (Not shown).
Black phenolic with nickel silver trimmed Ivorine rings at A, B, E, Black phenolic and Ivorine double band rings with Ivorine horizontal diamond inlays at C, D and black phenolic butt cap.
Cue was made with traditional solid maple shafts, (Not shown) but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 56
Maple forearm with 4 long turquoise points and 4 low Ivory Snake Jume points.
Blue lizard wrap.
Butt sleeve same as forearm with points in reverse direction.
Ivory snake juma joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic and double turquoise bands with nickel silver trim rings at A, B, C, D, E, and Ivory snake juma butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 57
Maple forearm with 4 long turquoise points and 4 low Snakewood points.
3 section grip with Brown lizard wraps.
Butt sleeve same as forearm with points in reverse direction.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors.
Black phenolic rings and thin turquoise bands divided by and trimmed with nickel silver trim at A, B, C, D, E, F, G and Ivorinea butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Dan Pelky
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 58
Maple forearm with 8 high-low Gabon Ebony points and 4 split Ivorine 'Spade' inlays at the base of the points.
Black lizard wrap.
Gabon Ebony butt sleeve with 2 rows of same Ivorine inlays at D, E.
Stainless Steel joint with radial thread pin and Ebony joint protectors.
Black phenolic rings with small Ivorine diamonds at A and black phenolic ring with nickel silver trim at B and black phenolic butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Joel Dadivas
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 59
Maple forearm with 4 Gabon Ebony points edged with 4 ply veneer and inlaid with Ivorine notched diamonds.
White with black speck pressed Irish linen lizard wrap.
Maple butt sleeve with 4 floating Gabon Ebony boxes edged with 4 ply veneer and Ivorine notched diamond inlays.
Ivorine joint with 3/8x10 thread pin and Ebony joint protectors, (Not shown).
Black phenolic rings with small maple windows at A, B and black phenolic & Ivorine 'Tad Box Link' rings at C, D, E and Ivorine butt cap.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Double Dave, Germany
 |  |  |
|---|
JD CUSTOM MAPLE CUES - MODEL 60
Same as Model 57, but with Honey stained tiger maple, wrapless Ivory Snake Juma grip section and Ivory Snake juma joint and butt sleeve.
Cue was made with traditional solid maple shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts.
Photo credits:- Jiten Patel
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 61
Full splice cue with maple forearm with 6 hi-low Rosewood points edged with 4 ply veneers.
Wrapless Rosewood grip section.
Maple butt sleeve with plain Rosewood band above the butt cap.
Black phenolic joint collar with brass radial thread pin and Ebony joint protectors.
Thin Black phenolic bands with Veneered 'Railroad' rings at A, B and veneered 'Railroad' rings at C, D, E, F and black phenolic butt cap.
Matching 8" Rosewood extension with radial thread pin and white turquoise joint collar and butt cap.
Cue was made with JD's own style LD shafts, but an alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts or custom high end shafts
 |  |  |
|---|---|---|
 |
JD CUSTOM MAPLE CUES - MODEL 62
Maple forearm with 4 bridged Gabon Ebony points with double bridged maple veneers inside the points and Recut Turquoise into Ivorine Diamond inlay in each point.
Blue lizard wrap.
Gabon Ebony butt sleeve with Connecting floating boxes of Veneers into the Ebony with larger recut Turquoise into Ivorine diamond inlay in each box.
Black canvas phenolic joint collar with steel 3/8x10 thread pin, traditional maple shafts with Ivorine ferrules and Ebony joint protectors.
Thin Black phenolic bands with Ivorine, black phenolic and blue veneer 'Bushka' rings trimmed with nickel silver A, B, C, D, E and Ivorine butt cap.
Matching 8" Rosewood extension with radial thread pin and white turquoise joint collar and butt cap.
An alternative custom version of this cue can be made with either traditional solid maple shafts, JD's own LD shafts, high end or custom shafts.
Photo Credits: Private Customer, USA
 |  |  |
|---|---|---|
 |  |  |